Hall effect suspended pedals - Eidos Series 
Hall effect suspended pedals - Eidos Series

The Eidos series electronic pedals are the best choice for cab-vehicles intended for heavy duty applications, requiring the installation of a reliable and robust pedal to be mounted in front of the driving position.

Available in two different fixing-flange types and customizable platform.

SUITABLE FOR commercial vehicles, buses, telehandlers, street-sweepers, construction machines.



VERSATILITY

Supply voltage: 5 V; 12-24V; 24-48 V

Output: single / double; option IVS signal

Output types (programmable): voltage (0,5-4,5V; 0-10V) or current (4-20 mA) analog signal; PWM (0.1-1 kHz); CAN (SAE J1939 / CANopen)

IVS types: single / double; NO / NC; dry contact / open drain; programmable switch threshold

Cable and connector: customizable

RELIABILITY

Operating principle: Hall effect (contactless)

Protection degree: IP67

FUNCTIONAL SAFETY

Circuit redundancy: two isolated and galvanically separated circuits

Return to starting position: two independent springs

BEST USES

• Accelerator pedal for electronically controlled diesel engines subjected to emission standards from Stage IIIB on.

• Accelerator pedal for electrically-driven vehicles

Inching pedal for work vehicles with hydrostatic transmission

• Compliance of control devices with functional safety standards

• Implementation of electronic drive-by-wire devices

• Use of a reliable device in harsh environments

Technological upgrade of control pedals

Cost saving and space optimization for replacement of pedal solutions with separate sensor

Plug and play solution with integrated electronics

HALL EFFECT TECHNOLOGY

An hall-effect sensor, integrated in the housing of the pedal, detects the field strength of a magnet integral with the footboard. It guarantees a reliable signal and immune to premature failures due to mechanical wear.

INTEGRATED ARCHITECTURE

The magnet - integral with the footboard - and the electronic board - integral with the housing - are positioned in the optimal position to reduce overall dimensions and remove moving connecting parts as well as redundant mechanical components.

PROGRAMMABLE ELECTRONIC BOARD

The programmable electronic board allows to set up the output signal values and the trigger threshold for the switch signal without hardware interventions and manual calibrations. It guarantee the highest level of reliability, precision and versatility.

INDEPENDENT CIRCUITS

Double output versions are obtained by integrating on the same electronic support two sensors with completely independent and galvanically isolated circuits, in compliance with functional safety standards.

MULTIFUNCTION BOARD

The output signal and the running consent signal circuits are integrated on a single contactless electronic board without any need for elements subject to wear, like microswitches and other mechanical connections.

ISOLATION OF THE ELECTRONIC BOARD

The compartment for the positioning of the electronic board is obtained from the housing structure in order to ensure total isolation from external environment and maximum mechanical robustness, at the same time.

RESIN-COATED BOARD COMPARTMENT

It ensures absolute impermeability to water/dust/corrosive agents infiltrations and makes the electronic board compartment a completely sealed subassembly of the product structure.

RETURN TO STARTING POSITION

It is implemented to maintain the minimum overall dimensions and at the same time to guarantee the redundancy of the springs, a suitable operating load as well as a high life cycle.

The number of connector pins is determined by the chosen electronic configuration; it is possible to install additional models upon customer's request.

Customize your needs!
= customizable
Our products can be modified or built on your specific requests

No products

To be determined Shipping
0,00 € Total

Check out