The Logos series electronic pedals are extremely versatile and suitable for both vertical mounting and under-the-platform mounting, with the lever in the right or left position, thanks to two simple measures: the rotation direction invertibility of the lever’s pin and the mechanical modularity of the lever.
The lever can be designed and installed directly by customers, in accordance with their specific design and ergonomic requirements.
SUITABLE FOR forklifts, ride-on scrubber driers and sweepers, self-propelled electric cranes, construction machines.
Supply voltage: 5 V; 12-24V; 24-48 V
Output: single / double; option IVS signal
Output types (programmable): voltage (0,5-4,5V; 0-10V) or current (4-20 mA) analog signal; PWM (0.1-1 kHz); CAN (SAE J1939 / CANopen)
IVS types: single / double; NO / NC; dry contact / open drain; programmable switch threshold
Cable and connector: customizable
Operating principle: Hall effect (contactless)
Protection degree: IP67
Circuit redundancy: two isolated and galvanically separated circuits
Return to starting position: two independent springs
• Accelerator pedal for electronically controlled diesel engines subjected to emission standards from Stage IIIB on.
• Accelerator pedal for electrically-driven vehicles
• Inching pedal for work vehicles with hydrostatic transmission
• Compliance of control devices with functional safety standards
• Implementation of electronic drive-by-wire devices
• Use of a reliable device in harsh environments
• Technological upgrade of control pedals
• Cost saving and space optimization for replacement of pedal solutions with separate sensor
• Plug and play solution with integrated electronics
HALL EFFECT TECHNOLOGY
An hall-effect sensor, integrated in the housing of the pedal, detects the field strength of a magnet integral with the footboard. It guarantees a reliable signal and immune to premature failures due to mechanical wear.
The magnet - integral with the footboard - and the electronic board - integral with the housing - are positioned in the optimal position to reduce overall dimensions and remove moving connecting parts as well as redundant mechanical components.
PROGRAMMABLE ELECTRONIC BOARD
The programmable electronic board allows to set up the output signal values and the trigger threshold for the switch signal without hardware interventions and manual calibrations. It guarantee the highest level of reliability, precision and versatility.
Double output versions are obtained by integrating on the same electronic support two sensors with completely independent and galvanically isolated circuits, in compliance with functional safety standards.
The output signal and the running consent signal circuits are integrated on a single contactless electronic board without any need for elements subject to wear, like microswitches and other mechanical connections.
ISOLATION OF THE ELECTRONIC BOARD
The compartment for the positioning of the electronic board is obtained from the housing structure in order to ensure total isolation from external environment and maximum mechanical robustness, at the same time.
RESIN-COATED BOARD COMPARTMENT
It ensures absolute impermeability to water/dust/corrosive agents infiltrations and makes the electronic board compartment a completely sealed subassembly of the product structure.
RETURN TO STARTING POSITION
It is implemented to maintain the minimum overall dimensions and at the same time to guarantee the redundancy of the springs, a suitable operating load as well as a high life cycle.
The number of connector pins is determined by the chosen electronic configuration; it is possible to install additional models upon customer's request.