Heavy duty pedals - Mythos Series 
Heavy duty pedals - Mythos Series

The MYTHOS series accelerator pedals are ideal for open-cabin agricultural and industrial vehicles, thanks to the die-cast aluminum structure. They integrate all of Elen’s know-how on programmable sensors into a product conceived for heat engine and electric motors’ vehicles: the output signal and the IVS are obtained through a firmware in the electronic board, starting from the movement of a magnet integrated in the footboard. This guarantees a reliable, accurate and repeatable signal which can be configured by the customer without manual calibrations in the production process; furthermore, the internal mechanics are simple and robust and do not require microswitches and other parts subjected to mechanical wear. The footboards are available in three lengths; optional cable-pulling bracket.


Supply voltage: 5 V; 10-30V; 12-48 V
Programmable analog or PWM output (for each channel): min-max levels
min-max levels within the supply voltage range or duty cycle;
increasing or decreasing inclination angle
IVS: single or double; NO or NC;
dry or open drain contact
changeover point can be programmed on a value of choice
Segnale di uscita: singolo o doppio
Connector of choice


Contactless Hall-effect
Double retraction spring
Output and IVS managed by the firmware,
without contact switches or manual calibrations
Protection class IP67
Maximum protection against vibrations and electromagnetic disturbances
Isolated and galvanically-distinct circuits (vers. 2 output)


Suitable for safety applications in accordance with the EN ISO 13849 regulations
Isolated and galvanically-distinct circuits

Customize your needs!
= customizable
Our products can be modified or built on your specific requests

No products

To be determined Shipping
0,00 € Total

Check out